Sampling Booth

Technical specification Air cleanliness : ISO class 5 / class 100 / M .5 Area air velocities : 0.450.05 mps (9020FPM) Air flow : vertical Noise level : less than 65db Vibration level : minimum POWER SUPPLY : 230V AC, 1-, 50HZ MOC: GI Powder Coated/ SS-304/ SS-316 Inside: Side panel with all three side with coving Three stage filtration EU4- Pre filter (90% down to 10micron) EU7-Intermediate filter (95% down to 0.3 micron) EU14- HEPA filter- Supply/ Exhaust (99.999% down to 0.3 micron) Statically & dynamically balanced motor- blower with isolator to reduce noise level Fluorescent lights (Vpore proof) Differential pressure gauge : 02 No.( Intermediate @ Hepa filter ) ON/OFF switches on front facia (BL / FL/UV) Auxilliary power socket: 5/15 AMP For external equipment Dop Port DQ,IQ,OQ,PQ Documentation Options And Accessories Double skinned PUF insulated side panels with/without view window Stainless steel perforated grille for HEPA fILTER Front Flexible Strip PVC Curtain Velocity display with High/ Low Alarms

Dispensing Booth

Reverse Laminar Air Flow Unit (RLAF)

Reverse Laminar Air Flow

Sampling / Dispensing Booth (RLAF) unit eliminated powder contamination to protect the operator and the Surrounding environment. it is designed to handle powder under aseptic conditions for optional G.M.P.

SOLVENT DISPENSING BOOTH

MOC - MOC with : S.S. 304 Centrifugal Blower & Filter housing : MS Powder Coated Exhaust Air (Carbon Filter, Pre Filter & HEPA Filter) Activated Carbon Filter Activated Carbon + Activated Alumina Media filled in powder Coated Frame HEPA Filter Minipleated HEPA Filters down to 0.3mic. particulate at an efficiency of 99.997% (EU14) duly tested on DOP tested Pre-Filters Pre-Filter down to 10mic. Particulate at an efficiency of 90% (EU4) enclosed in aluminum frame with epoxy sealing (Washable Type) Blower Assembly - Dynamically and statically balanced motor and blower Side Panels Do with SS-304 Electrical - 1) On/Off Switch BL / FL / UV (FLP) 2) Fluorescent Light 1 No. (FLP) 3) UV Light - 1 No. (FLP) Pressure Gauge - 2 Nos. Magnahelic Gauge, one is to check the pressure drop across the HEPA filter, another for Intermediate Filter Power supply - 240 V, 50Hz, Single Phase Documentation - DQ, IQ, OQ Test Certificate (Factory Tested Only)